Archive for September 2014 | Monthly archive page

General refilling instructions for most Vector lighter products 01Make sure no open flames are near. 02Adjust flame height to low setting. 03Bleed the fuel tank by pressing down on the lighter refill valve until hissing stops. (see diagram) 04Shake refill can to check for butane gas. 05Hold both the refill can and the lighter upside down in each hand. 06Push refill nozzle firmly, and all the way into the lighter valve. 07Fuel in position for 15-20 seconds. 08Wait until lighter reaches room temperature before igniting. (approx: 5-10 min) 09Reset flame height from low flame to desired setting.